Free PDF Books

Result for: crochet on the double tutorial

about result: 13
3001d1325934771 pop up 3d cards tutorial pop up 3d card kit tutorial pdf
3001d1325934771 pop up 3d cards tutorial pop up 3d card kit tutorial pdf

Apply double sided tape to back of insert. With Main Card Front folded push the fold of the insert into the inside fold of the card and press down to stick. Apply double sided tape to the back of the other insert as shown and fold the main card front over it to stick. Doing one side at a time ensures that the insert will not pucker and the card will close properly. the insert glued to main card. Score and Fold the Pop Up. Close the card on to B. the Inside Pop Up will look like this.

Size: 2253 Kb Pages: 13 Date: 2012-01-29

+0
4207d1342634791 new concept panel pop up 3d card kit tutorial panel pop up 3d card kit tutorial pdf
4207d1342634791 new concept panel pop up 3d card kit tutorial panel pop up 3d card kit tutorial pdf

Apply bone folder to the back of your folds again. Push Flap 'F' into Slot 'F'. Fold the card flat as if you are putting into an envelope and place sellotape shown in red over the flap on the wrong side of the pop up structure. Folding it flat before you put the tape on will ensure that it the pop up will fold down flat. Apply double-sided tape (shown in red) to A, B and C on the pop up structure,also apply DST over D and E (from the valley fold to the mountain fold).

Size: 8704 Kb Pages: 14 Date: 2012-11-01

+0
4288d1344320906 new concept christmas tree decoration pop up 3d card kit tutorial christmas tree decoration pop up 3d card kit tutorial pdf
4288d1344320906 new concept christmas tree decoration pop up 3d card kit tutorial christmas tree decoration pop up 3d card kit tutorial pdf

Score and fold mountain and valley folds as shown. Apply bone folder to make folds crisp. Cut small slit in the middle of the mountain fold (see blue line) just wide enough to get your ribbon through. Thread ribbon through taping the ribbon down to the centre as shown. I used a double sided tape on the actual card, pressed the ribbon on to it and then applied sellotape over the top (shown in yellow). This will ensure that the ribbon will hold the weight of the card.

Size: 9114 Kb Pages: 14 Date: 2012-10-21

+0
4000d1338667348 new picture pop out a5 3d card kit tutorial picture pop outs a5 3d card kit tutorial pdf
4000d1338667348 new picture pop out a5 3d card kit tutorial picture pop outs a5 3d card kit tutorial pdf

Paperclips really help with positioning as you can hold the paperclip each side when you apply to the main card in the next step. Apply concertina frames to the front of the card pressing down well around the paperclips before you remove them. Once removed press down to stick where the paperclips were! Apply your chosen sentiment to the insert with double-sided tape or glue. It could, alternatively, be put on the back of the card, if preferred. Finished Card with Insert (side view).

Size: 6246 Kb Pages: 12 Date: 2012-06-29

+0
4137d1341517650 new concept shelf pop up 3d card kit shelf pop up 3d card kit tutorial pdf
4137d1341517650 new concept shelf pop up 3d card kit shelf pop up 3d card kit tutorial pdf

Panel F is a different shape in each design. This is the top down view showing where the panels go. Score Mountain Fold on Page 1 of Kit (Front and Back of Card) as shown at left. Make Fold. Use a bone folder to make the fold crisp. Apply 3D Pads to the back of the decoupage pieces (Page 4 of the Kit). Layer the decoupage up in alphabetical order. Apply the Pop Up Structure (Page 2 of kit) into the Front/Back Card with double sided tape (shown in red) one side at a time. I do the back first.

Size: 7475 Kb Pages: 12 Date: 2012-07-08

+0
3918d1337270266 new concept picture pop out 3d square card kits picture pop outs 3d card kit tutorial pdf
3918d1337270266 new concept picture pop out 3d square card kits picture pop outs 3d card kit tutorial pdf

ENVELOPE INSTRUCTIONS Print on to Cardstock or Thick Paper. Cut out the 2 envelope pieces. Score and fold as shown. Use a bone folder to make crisp. Apply double-sided tape to the bottom flap of the front envelope and join to the bottom edge of the back envelope, as shown. I usually put a piece of Sellotape over this join as this prevents the card, when it is put into the envelope, getting caught up on the join. Press down well.

Size: 3072 Kb Pages: 12 Date: 2012-06-13

+0
ModelSim tutorial pdf
ModelSim tutorial pdf

Compiling in ModelSim You can compile your Verilog files from inside ModelSim. From the Compile pulldown menu select Compile. You will see that the default library is the work library. Chose to compile your files in the newly created sims library rather than the work library. To compile your files browse to your src directory select the files counter.v, top.v and tb_tutorial.v and double-click them to compile. We will use the other files later in this tutorial.

Size: 205 Kb Pages: 3 Date: 2013-05-24

+0
hillies imagenation photoimpact xl tutorials pi tips pdf
hillies imagenation photoimpact xl tutorials pi tips pdf

Close your PrintScreen document without saving. 6. double click on your swatch in your Easy Palette to bring it out into a new document window. 7. In another new document, create the shape you want with the Path Tool. 8. With the shape active, click on the Color box in the Attribute Bar and select Color on Screen in the menu that comes up. 9. Use the Eyedropper that becomes available to pick a colour from your swatch. Your shape will change to that colour. TIP TWO: CUTTING OUT the EASY WAY 1.

Size: 103 Kb Pages: N/A Date: 2012-07-27

+0
State Diagram Tutorial 10 1 pdf
State Diagram tutorial 10 1 pdf

double click State2. Edit the outputs as seen below. Click “OK” when done. Continue till all states’ outputs have been defined as follows. If a state transition is not needed, it can be deleted by left clicking on the transition line and pressing the delete key. Let’s delete the following state transitions. State0-->State3 State2-->State1 State2-->State3 State3-->State2 the state diagram should now look like the following. Do the same from State1 to State3 and State2 to State0.

Size: 319 Kb Pages: 16 Date: 2013-08-11

+0
ISE Download Tutorial pdf
ISE Download tutorial pdf

And change the Start-Up Clock to JTAG Clock. Click Ok. double click on Generate Programming File (or alternatively, right click on Generate Programming File -> Run). Now your BIT file is ready to be downloaded to the Digilab 2 board. Make sure that the DIO1 board (the smaller one) is connected into tabs E & F of the Digilab 2 board (the larger one). Connect the power supply to the board before you plug the supply to the outlet. There is a small switch next to the parallel port on the board.

Size: 1229 Kb Pages: 14 Date: 2013-01-18

+0
>  Sort by:
Sorry, this function doesn't work, we are going to improve this as soon as possible